Back to Top

Electrodes and contact points for electronic training collars d-control professional

The d-control professional training electronic collars can be chosen from 3 sizes of receivers, which are supplied with contact points in 2 sizes. For each receiver size a different length of contact points is specified. Choose the size of contact points also according to the length of your dog's coat.

The contact points in lengths of 7 mm or 10 mm are suitable for the electronic collar receivers d-control professional ONE, which is also the smallest receiver in the range of electronic training collars. The electrodes are recommended for all dogs with short dog's coat.

The 12 mm contact points are suitable for all d-control professional mini and d-control professional receivers and are recommended for dogs with short coat or 17 mm for dogs with longer coat.

If your dog has a really thick coat, choose the 21 mm contact points.

Before putting on the collar, check the contact points for proper tightening. Correct tightening of the collar is essential for wearing it comfortably.

Screw the contact points onto the screws of the receiver. Tighten them manually carefully. Do not use a pliers – this could damage the product. View in manuals for each product.

Shown 5 from 5 products

Contact points - electrodes 10 mm ONE

Packaging: 2 pcs
For: d-control collar receivers
Product Details
10115

Contact points - 12 mm electrodes

Packaging: 2 pcs
For: d-control, d-fence collar receivers
Product Details
1011

Contact points - electrodes 17 mm

Packaging: 2 pcs
For: collar receivers d-control, d-mute ONE, d-fence
Product Details
10111

Contact points - electrodes 21 mm

Packaging: 2 pcs
For: collar receivers d-control, d-fence
Product Details
10112

Contact points - electrodes 7 mm ONE

Packaging: 2 pcs
For: d-control collar receivers
Product Details
10114

Follow us here


You hereby authorize VNT electronics sro, with its registered office at Dvorska 605, 563 01 Lanskroun, ID: 64793826, registered in the public register kept by the Regional Court in Hradec Kralove, Section C, Insert 9839 (hereinafter referred to as the "Administrator"), 101/2000 Coll., on the Protection of Personal Data (hereinafter referred to as the "Personal Data Protection Act"), processed the following personal data:
name and surname
e-mail
any other information you write on the forms on this website or emails sent to the addresses listed on this site
The above-mentioned personal data must be processed for the purpose of drawing up an offer or contract, processing an order or sending a price list. This data will be processed by the Administrator for 1 year.



You hereby give consent to VNT electronics s.r.o., with its registered office at Dvorská 605, 563 01 Lanškroun, Identification No. (IČ): 64793826, e-mail:info@dogtrace.com, tel.: +420 461 310 762, entered in the Companies Register administered by the Regional Court in Hradec Králové, Section C, Entry No. 9839 (hereinafter the “Data Controller”) with processing the following personal data pursuant to Act No.101/2000, Coll., on Personal Data Protection (hereinafter the “Personal Data Protection Act”):

• Name and surname;
• E-mail; and
• All other data that you will write into the forms on this website or into e-mails sent to the addresses stated on this website.

The above-mentioned personal data must be processed for the following purposes:

• To prepare a bid or agreement, to process an order or send price lists. The data will be processed by the Data Controller for a period of one year.
• To provide a licence for the mobile application Dogtrace GPS. Said personal data concerning such application will be maintained by the Data Controller for a period of ten years after the consent was given.

You give your express consent with the above-mentioned processing. The consent may be withdrawn at any time for example by sending an e-mail or letter to the above-mentioned Data Controller’s contact data. Personal data are processed by the Data Controller, but personal data may also be processed for the Data Controller by the following processors:

• Technical controller; or
• Other providers of processing software, services and applications.

Please note that pursuant to the Personal Data Protection Act you are entitled to withdraw your consent at any time, to request information from us what personal data of yours we process, to request explanation from us concerning personal data processing, to request access to such data and to have such data updated or corrected, to request deletion of such personal data and, in case of any doubt concerning fulfilment of the obligations connected with personal data processing, to contact us or the Personal Data Protection Office.